DIAMANTE

MATT BLACK/ANTHRACITE
This content requires HTML5 & Javascript or Adobe Flash Player Version 9 or higher.
 

DIAMANTE

The Diamante utilizes Toray T1000 and T800 HI Modulus carbon fiber pre-preg. A widely used fiber in the automotive, aviation and military industries, our Toray is made even more resistant to impacts and fatigue stress through our use of specific proprietary resins.
The “monolithic” front frame section, made by the semi-integrated front fork / frame / stem / headset, provides a more aerodynamic and aggressive position, ideal for ProRacers; for those who require a less “stretched”, more raised position, a conical shaped spacer is available (comfort kit).  The conical shaped spacer rests on the base of the headset and effectively raise the stem without losing the linearity of the headtube form.  Additionally, a new upper fork shape has been developed to virtually stretch into the lower part of the frame allowing the steering stresses to be discharged over a wider surface and thereby facilitating manoeuvrability in challenging curves.  
The DIAMANTE measurements are by far the best results found by comparison with other frames of the highest range on the market.

All frame and bikes are shipped with black carbon head spacers. We offer 7 different colour spacers only for after-market service.

2FIT


2FIT

The frame can be used with mechanical or electronic group.

WIND SHAPE


WIND SHAPE

Aerodinamic shapes for maximum air penetration.

UCI APPROVED


UCI APPROVED

The frame is U.C.I. approved.

BLADE FRONT


BLADE FRONT

Semi-integrate front fork/frame/stem/headset.

COMFORT KIT


COMFORT KIT

You can obtain a 2 cm higher handlebar position mantaining the frame’s characteristics of rigidity.

TAPERED HEADSET


TAPERED HEADSET

Headset and fork 1-1/8” to 1.5” for more rigidity.

CARBON TECH


CARBON TECH

We use sheets with fibers oriented at 0°, 22°,45°and 3 types of woven carbon filaments: 1K, 3K and UD.

ALLOY FREE


ALLOY FREE

Monocoque frame without aluminium reinforcement parts.

 

DIAMANTE FRAME TECHNOLOGY
100% 1K Torayca High Modulus Carbon Fiber in T1000 and T800

LAY-UP STRUCTURE:

Top Tube: 1 x 0° + 1 x 22° + 2 x 45°

Down tube: 2 x 0° + 1 x 22° + 2 x 45°

HT: 2 x 0° + 3 x 45°

ST: 1 x 0° + 3 x 22°

CS and ST: 1 x 0°, 3 x 22° + 1 x 45°
 

TECHNICAL SPECIFICATION

 

OPTIONS / STANDARD SIZE COMPONENTS