DIAMANTE SV

FACTORY EDITION
 
Introducing the all new Diamante SV Factory edition with 12 speed Campagnolo Super Record. Inspired by the complex weave and layup of carbon fibre in our signature Diamante SV model we wanted to put an emphasis on certain key areas of the frame to display how the fiber orientation is applied through a unique paint scheme. The Factory model is about highlighting our unique and advanced 100% Made in Italy manufacturing process from start to finish, from carbon layup to painting and finally assembly of the complete bicycle.

Diamante SV introduces the  “3B-BASSO”  (patented) clamp system. The seat clamping is totally masked and invisible on the frame. Not only nice to look at but also technically innovative.
Getting way ahead of the usual clamp-ring/screw holding the seat post, or the extra bulking knot on the frame to house the seat screw; The 3B-BASSO (pat.) triple point fixing becomes a solid structure between seat-post and seat-tube. This system is slim, invisible and strong. In addition to all of this the extra rubber gusset in connection with the 3B-BASSO (pat.) has an anti vibration function which anyone can appreciate on rough surface roads.

2FIT


2FIT

The frame can be used with mechanical or electronic group.

3B VIBRATION DAMPENING


3B VIBRATION DAMPENING

3B triple point clamp and rubber gusset

ALLOY FREE


ALLOY FREE

Monocoque frame without aluminium reinforcement parts.

BLADE FRONT


BLADE FRONT

Semi-integrate front fork/frame/stem/headset.

CARBON TECH


CARBON TECH

We use sheets with fibers oriented at 0°, 22°,45°and 3 types of woven carbon filaments: 1K, 3K and UD.

COMFORT KIT


COMFORT KIT

You can obtain a 2 cm higher handlebar position mantaining the frame’s characteristics of rigidity.

TAPERED HEADSET


TAPERED HEADSET

Headset and fork 1-1/8” to 1.5” for more rigidity.

UCI


UCI

WIND SHAPE


WIND SHAPE

Aerodinamic shapes for maximum air penetration.

 
DIAMANTE SV FRAME TECHNOLOGY
100% 3K Torayca High Modulus Carbon Fiber in T1000 and T800

LAY-UP STRUCTURE:

Top Tube: 1 x 0° + 1 x 30° + 2 x 45°

Down tube: 1 x 0° + 1 x 30° + 2 x 45°

HT: 2 x 0° + 3 x 30° + 1 x 90°
ST: 1 x 0° + 1 x 30° + 1 x 45° + 1 x 90°
CS and ST: 2 x 0° + 2 x 30° + 1 x 45°
 

TECHNICAL SPECIFICATION

 

OPTIONS / STANDARD SIZE COMPONENTS



HOW TO ADJUST  “3B-BASSO” CLAMP SYSTEM